Accessories

share
A wide range of accessories for Eurograte gratings: gratings clamps, adjustable anti-corrosive polypropylene pedestals, diamond disc blades, and finishing and protection kits.

Details of accessories

Eurograte gratings can be equipped with a variety of accessories:

  • Gratings clamps (in stainless or galvanized steel) suitable for fixing gratings.
  • Adjustable anti-corrosive polypropylene pedestals for creating floating platforms and raised decks.
  • Diamond disc blades for achieving perfectly straight cuts on the gratings. Eurograte gratings can be cut and shaped upon specific requests. Additionally, cutting can be easily performed on-site.
  • Finishing and protection kit: necessary to restore the original chemical resistance of the cut parts and to protect the fiberglass from exposure due from cutting. The kit includes resin, fiberglass, catalyst, a brush, and related instructions.

Products

It is possible to receive the technical documentation by contacting Eurograte.

Typical fixing system with a bolt, or a clamp when a hole can be drilled in the support structure. The products are in AISI 316 stainless steel

Fixed head or self-levelling propylene supports adjustable from a minimum 37.5 mm to 550.00 mm.

For greater heights, please contact Eurograte

Fixing solutions with the following characteristics:

  • lightweight material,
  • electrically and thermally insulating,
  • resistant to corrosion and weathering,
  • available in Epoxy and Polyester versions.

 

ImageProductVersion
square nut 12 mm diameterepoxy resin
square nut 16 mm diameterepoxy resin
square nut 20 mm diameterepoxy resin
threaded bolt 12 mm diameter (L = 1.9 mm)epoxy resin
threaded bolt 16 mm diameter (L = 1.9 mm)epoxy resin
threaded bolt 20 mm diameter (L = 1.9 mm)epoxy resin

Some applications of accessories